Sormac
  • Leafy vegetables
  • Herbs

Please fill in the form below to receive the brochure in your email inbox.

This field is required.
This field is required.
This field is required.

Air drying tunnel LDT-50/5D

The air drying tunnel was developed specifically for drying delicate leafy vegetables and for creating a low attached moisture percentage with leafy vegetables.

Before reaching the drying tunnel, the product goes through a preliminary de-watering step by means of a dewatering belt.

In the drying tunnel, the product is dried in an air stream that is oriented upwards, at a temperature of 25 to 30 ºC. The airspeed is such that the product will float, causing as much moisture as possible to be released.

The air stream that is in circulation is cooled down in a heat exchanger to a temperature of approx. 5 ºC. Some of the water vapor is removed from the airstream because it condenses on the cold fins of the heat exchanger.

To enable the air to absorb moisture again, it is passed through a second heat exchanger where it is warmed up to a temperature of 25 to 30 ºC, lowering its relative humidity.

While drying the product, the air cools down due to the evaporation of the surface water on the product. This effect keeps the product much cooler than the drying air.

The air is cooled down and warmed up by using a refrigerant of approx. 0 ºC and, respectively, 33 ºC.

The air drying tunnel enables moisture values of less than 2% on the surface of the product to be reached.

The LDT-50/5D air drying tunnel is equipped with its own cooling installation. No additional refrigeration is required.

Product specification

The air drying tunnel is ideally suitable for delicate leafy vegetables such as spinach and baby leaf, but also for cut iceberg lettuce, etc.

Capacity

The capacity of the air drying tunnel type LDT is depending on product type and desired moisture content.

Capacities up to 600 kg/h (1,320 lbs/h) can be reached.

Features

Thermal drying

The thermal drying process minimizes any product damage and enables the product to be dried to a moisture retention level of 0% if so desired.

Closed system

The air drying tunnel has been designed as a closed system. This prevents energy from being dissipated into the environment.

Integrated cooling section

The last section of the tunnel cools down the product to the packaging temperature desired.

Hygienic design

All the compartments in the air drying tunnel are accessible for optimum cleaning.

Air drying tunnel LDT-50/5D

Dimension drawing