Sormac

Please fill in the form below to receive the brochure in your email inbox.

This field is required.
This field is required.
This field is required.

Knife peeler MS

The MS knife peelers are suitable for continuous peeling of pre-washed or pre-peeled root products, like potatoes, red beet, celeriac, etc.

The produce to be peeled is conveyed by a transport auger through a horizontal, rotating drum. The inside of this drum is equipped with a large number of knives. The dwell time and peeling effect can be controlled by varying the rpm of the drum and the speed of the transport auger. The special shape of the drum and the way the knives are positioned effectively avoids the produce from being flat peeled.

The peeling waste is separated from the peeled product immediately and ejected by the rotating drum. The waste can be collected for removal in a crate or waste transporter via the waste funnel at the base of the machine.

In the model MS-20/Combi, potatoes that have not been pre-peeled can be peeled as normal. The Combi-drum has several pre-peeling plates that replicate the effect of pre-peeling. The final peeling quality is equal in every respect to the MS-20 knife peeler.

 

  • "The MS peels the potatoes perfectly with no flat peeling effect. Partly due to this, the peeling yield is higher than that of other machines."

  • Mr. Henk van Raalte, Schaap Holland B.V., The Netherlands

Product specification

Washed (round) tuberous products of a diameter of between 1 3/16″ and 7 3/32″. There must not be any stones or sand residues in or with the product.

Capacity

The MS-20 knife peeler has a peeling waste capacity of 1,300 to 1,500 lbs per hour. With 40% waste, the input capacity is therefore 3,300 to 3,850 lbs per hour. When polishing a pre-peeled product (waste percentage of approx. 20%) the input capacity is consequently between 6,600 to 7,700 lbs per hour.
The capacities of the MS-30, MS-20/Combi, and MS-10 are approx. 150%, 80% respectively 50% of the capacity of the MS-20.

Features

Patented drum suspension

Floating suspension for quiet and stable drum rotation. Hardly any friction and few wearing parts.

Aseptic motors

The motors are sealed hermetically and protected against jets of water (IP66); no unnecessary air movement over the product.

Patented drum design

The entire product surface is peeled; flat peeling is avoided.

Large drum hatch

A hatch over the full length of the drum provides easy access to the drum and the transport auger for cleaning and inspection.

Options

Switch cabinet with frequency inverters and digital control

Including assembly and cabling.

Waste transportation system

Excentric type EAP waste pump.

Knife peeler MS

Dimension drawing

Specifications

TypeMS-10MS-20, MS-20/CombiMS-30, MS-30/Combi
Voltage230/400 V, 50/60 Hz 230/400 V, 50/60 Hz 230/400 V, 50/60 Hz
Installed power 2.38 kW 2.57 kW 6.75 kW
Dimensions (L x W x H) 2,265 x 1,380 x 2,355 mm 3,250 x 1,380 x 2,355 mm 4,210 x 1,440 x 2,565 mm
Water consumption 0 - 1.2 m3/h 0 - 2 m3/h 0 - 2.8 m3/h
Drum length 1,000 mm 2,000 mm 3,000 mm